110913 Metz Data logger, Modbus TCP, M-Bus, S0-input, Modbus RTU, Multi I/O-module with digital and analog inputs and outputs

EWIO-9180-M-Modbus is a Modbus Gateway with 20 I/Os for different tasks in automation, several of the I/Os are configurable. It is also an Open Smart Metering Gateway for automatic readout of meter data at the M-bus and Modbus to monitor energy consumption in buildings, machines, plants and systems. Consumption data are stored as CSV file in the integrated SQL data base and supplied by mail or FTP for analysis. EWIO-9180-M-Modbus connects digital and analog signals from the actuator and sensor level with a Modbus TCP network. EW I/O extension modules can be connected by jumper to EWIO-9180-M-Modbus to extend the sensor/actuator level. SQL commands extend the functionality of EWIO-9180-M-Modbus. Configuration, parameter setting and control of EWIO-9180-M-Modbus are done by a web browser.  Operating voltage 24 V DC Network Ethernet 10/100MBit, RJ45 Protocol TCP/IP and Modbus TCP Internal memory 128 MB RAM / 64 MB Flash External memory (microSD) up to 8 GB, 2 GB installed Operating system embedded standard Linux External I/O interfaces RS485 with MC protocol Inputs 4 x digital Optocoupler, galvanically isolated 4 x S0 Inputs configurable for resistance or 4 x analog 40 Ohm - 4 MOhm for voltage 4 x analog 0 - 10 V DC 2 xcurrent analog 0 - 20 mA DC 4 x relays change over contacts (4PDT) / 250 V AC / 5 A 3 x transistor PNP / 24 V DC / 20 mA 1 x PNP / 15 V DC / 30 mA 2 x voltage analog 0 -10 V DC 2 x current analog 0 -20 mA