Термометр сопротивления TR10-K

Application  
  
  
For all industrial and laboratory applications    
Replacement measuring insert for servicing  
for flameproof enclosure   (Model TR10-L)    
  
Special Features  
  
  
Application ranges from -200 °C to +600 °C    
Made of mineral-insulated sheathed cable    
For all standard thermowell designs    
Spring-loaded design    
Explosion-protected versions    
  
Description  
  
The measuring inserts per DIN 43 735 for resistance thermometers described   here are designed for installation in a protection assembly. Operation without   thermowell is only recommended in certain applications. These measuring inserts   are made from flexible, mineral insulated sheathed cable. The sensor is located   at the tip of the measuring insert. This model is spring-loaded to ensure that   the measuring insert is firmly pressed down on the thermowell bottom and   conforms to DIN 43 735. Apart from the DIN versions, customer specific versions   are available, for example:  
  
To suit inner diameter of the thermowell    
Without terminal block    
With transmitter    
  
Models with rigid insert tube are also available. Type and number of   sensors, accuracy and method of connection can be selected individually for the   appropriate application. Adequate heat transfer between thermowell and   measuring insert is only ensured when the measuring insert is of correct length   and diameter.